Price:Unfilled

Send inquiry

Overview

Cryogenic Planetary Ball Mill is a combination of planetary ball mill and refrigeration equipment. Most materials are heated due to friction or exothermic reactions during high-speed grinding, which may cause changes in the physical and chemical properties of the material and produce negative grinding effects. Low-temperature planetary ball mill is mainly used for material grinding processes that require strict temperature control.

 

The Cryogenic Planetary Ball Mill has four ball milling tanks installed on a turntable. When the turntable rotates, the tank axis performs planetary motion, and the ball in the tank moves at high speed to grind and mix the sample. This product can be crushed by dry or wet methods and mixed with various products of different materials and particle sizes. The minimum particle size of grinding powder can be as small as 0.1mm.

 

Features of Beifan Cryogenic Planetary Ball Mill

Cryogenic (low temperature control) planetary ball mill is a combination of planetary ball mill and air cooling device. The air cooling device adopts the principle of air conditioning compression refrigeration. The heat generated by grinding can be quickly removed through air-cooled gas circulation. Depending on the ambient temperature, the temperature of the ball milling space can be controlled between 5-15°C. This type of ball mill is mainly used for ultra-fine grinding of materials under low temperature process conditions. The invention has the advantages of simple structure, convenient operation, convenient maintenance and low energy consumption.

 

1. Suitable for materials that require low-temperature ultra-fine crushing.

2. Simple structure.

3. Simple operation.

4. Easy maintenance.

5. Low energy consumption.

 

Application areas

Low-temperature planetary ball mills are widely used in geology, minerals, metallurgy, electronics, building materials, ceramics, chemical industry, light industry, medicine, environmental protection and other departments. Suitable for electronic ceramics, structural ceramics, magnetic materials, lithium cobalt oxide, lithium manganate, catalysts, phosphors, long afterglow phosphors, rare earth polishing powders, electronic glass and other production fields. Powder and fuel cell production, zinc oxide varistors, piezoelectric ceramics, nanomaterials, wafer ceramic capacitors, MLCC, thermistors (PTC, NTC), ZnO varistors, dielectric ceramics, alumina ceramics, zirconium oxide Ceramics, phosphor powder, zinc oxide powder, cobalt oxide powder, nickel zinc ferrite, manganese zinc ferrite, etc.

 

Technical Data Sheet of BEIFAN Planetary Ball Mill

Drive Mode	Gear drive
Operation Mode	Two or four mill jars can be used for each grinding
Max Capacity for Materials	Less than 1/3 of each jar volume Total max capacity: less than 1/3 of total jars volume
Feed Size	Soft and crispy materials ≤ 10mm Other hard materials ≤ 3mm
Output Granularity	Smallest granularity can be achieved to 0.1μm
Rotation Speed Ratio	1:2
Max Continuous Operating Time	72 Hours
Materials of Available Mill Jars	304 Stainless steel, 316l stainless steel, Zirconia, Nylon, PU, Alumina ceramic (corundum), PTFE, Agate, Tungsten carbide

Remarks: Cryogenic planetary ball mill is combination of planetary ball mill plus air-cooling device, which can be equipped with vertical planetary ball mill, horizontal planetary ball mill, full-directional planetary ball mill.

Table 1 Technical Parameters For Cryogenic Planetary Ball Mill

Model No.	Voltage	Power	Rotation Speed	Noise
XQM-1(C)	220V-50Hz	0.75KW	70-670 rpm	Less than 60db
XQM-2(C)	220V-50Hz	0.75KW	70-670 rpm	Less than 60db
XQM-4(C)	220V-50Hz	0.75KW	70-670 rpm	Less than 60db
XQM-6(C)	220V-50Hz	0.75KW	70-670 rpm	Less than 60db
XQM-8(C)	220V-50Hz	1.5KW	70-580 rpm	Less than 60db
XQM-10(C)	220V-50Hz	1.5KW	70-580 rpm	Less than 60db
XQM-12(C)	220V-50Hz	1.5KW	70-580 rpm	Less than 60db
XQM-20(C)	380V-50Hz	4.0KW	50-430 rpm	Less than 65db
XQM-40(C)	380V-50Hz	5.5KW	40-390 rpm	Less than 68db
XQM-60(C)	380V-50Hz	7.5KW	40-260 rpm	Less than 68db
XQM-100(C)	380V-50Hz	11KW	40-260 rpm	Less than 68db

Table 2 Technical Parameters For Cryogenic Planetary Ball Mill

Model No.	Speed Control	Net Weight	Net Dimensions
XQM-1(C)	Frequency Control	93kgs	750*470*564mm
XQM-2(C)	Frequency Control	93kgs	750*470*564mm
XQM-4(C)	Frequency Control	93kgs	750*470*564mm
XQM-6(C)	Frequency Control	93kgs	750*470*564mm
XQM-8(C)	Frequency Control	150kgs	900*600*640mm
XQM-10(C)	Frequency Control	150kgs	900*600*640mm
XQM-12(C)	Frequency Control	150kgs	900*600*640mm
XQM-20(C)	Frequency Control	330kgs	1200*750*920mm
XQM-40(C)	Frequency Control	468kgs	1400*850*1160mm
XQM-60(C)	Frequency Control	900kgs	1600*990*1250mm
XQM-100(C)	Frequency Control	1250kgs	1750*1140*1330mm

 

http://www.beifanequip.com/